My sincere thanks to
Cris Palomino and Robin
Wood helping me with this tutorial.
| This is a tutorial on using the Mesh Warp Tool in PSP8 to create drapery. You'll also need the Jama 3D Plugin from Redfield Plugins (freeware). I've also been told that Photo Paint has a similar tool called Mesh Warp that should allow you to do this as well. Photoshop also has a tool called Liquify that does something similar and Painter users can use the Liquid / Distorto brush. | |
| Since we're just practicing, create a new document, 500x500
and fill with white. Now, go to your plugins menu and select the Jama 3D filter from the Redfield submenu. Make sure that the 1 Jalousie preset is selected and the image will look like the image to the right. (click on image for a larger view) |
 |
| If you want horizontal drapery, go ahead and apply now, but
we're starting with vertical drapery. Click on the rotate tool until the image has vertical drapes. |
 |
| And this is the result. After following this tutorial, feel free to play with the other settings to get various shading possibilities, but for now, just click on Apply. (click on image for a larger view) |
 |
| Back in PSP8 proper, select the Mesh Warp tool. |
 |
| Depending on how detailed and large the drapery is, adjust the horizontal and vertical mesh amounts. For now, choose 5 for both horizontal and vertical. |
 |
| And here is our starting point: |
 |
| Start moving the mesh points around to resemble drapery.
Just play around for now getting used to the tool and creating different
drapery shapes. Please note that the outside mesh points cannot be moved up or in, so you'll need to account for this when determining the mesh count and moving the points around. The outside vertical points will go up and down but not left or right, and the outside horizontal points will go left and right but not up and down. This is probably the only failing in this most excellent of tools. Increase the mesh size as needed to take this into account or do the following ... |
 |
| Before you start moving the mesh about, resize the canvas by
100 or 200 pixels, then increase the mesh size so that at least one of the
mesh lines is on or near the edge of the image. There can be one or two mesh
lines outside the image, or none if you prefer. This gives you greater control over the mesh warp and takes care of PSP's limitation. Just make sure you resize the canvas before you start moving the mesh about, otherwise you'll have to apply the mesh warp before you can resize the canvas. (Thanks to Nanson at the Renderosity PSP Forum for this tip) |
 |
| When you are happy with what you have, double-click on one
of the mesh points to apply the Mesh Warp tool, then select a different tool
(the arrow is a good choice) to see the results. This is kind of plain though, so let's add a pattern. |
 |
| Create a new layer above the drapery and set the Blend Mode
to Multiply. Select a pattern and fill the layer with the pattern. It will look similar to what you see to the right. Pretty cool, huh? Don't forget to play around with the mesh warp tool to get interesting shapes for your drapery. These are fairly uniform in order to give you an idea, but is rarely what you'll see in real life. (fabric pattern is from the Fabric Shoppe II package by Mehndi Studios) |
 |
| Now let's make a drapery swag. | |